4-20 Print Controller User’s Guide
Chapter 4 Control Panel Setup
● Forced Output
When the tray runs out of preset size papers, or when the tray does not contain papers
whose size meets the demand from the printer driver, the printing system displays a mes-
sage prompting the user to load additional papers.
The process by which the user selects, when the prompt appears, a different size of papers
on the operation panel and lets the print work continue on these papers, is referred to as
“Forced Output.”
Forced Output Procedure
1. Make sure that the LCD touch screen shows a massage prompting the user to
load additional papers of proper size.
2. Touch and select the desired size displayed in the paper sizes area.
3. Press the [START] button.
4. The printout is made on the selected size of papers.
When you choose not to use Forced Output, delete the print job, and change the setting
concerned on the application, or set the requested size of papers in the tray.
To Next Page
Loading...