4-16 Print Controller User’s Guide
Chapter 4 Control Panel Setup
■ Print Job
● Cancel
You can stop the job reserved or the job in progress. If the job is still on your computer, first,
delete the job from your computer and press the [STOP / CLEAR] key on the control panel.
You can not stop the remaining job completely by only pressing the [STOP / CLEAR] key.
The [STOP / CLEAR] key can clear the memory of the print controller and E-RDH in the
main body printer but can not clear the remaining job on your computer.
How to cancel the job
1. While a job is currently printing, touch the [Stop] key to cancel the job.
The confirmation screen will appear.
2. Touch the [EXIT] to confirm the cancelation.
Touch the [CONTINUE] to continue printing without canceling the job.
NON COMPLETE JOB LIST
You may want to view a list of the print jobs that remain not output because of cancella-
tion or deletion from the queue.
To do this, touch [NON COMPLETE JOB LIST] in the Job Status Screen.
The list is displayed with job names, user names, file names, status, etc.
To Next Page
Loading...