2-4 Print Controller User’s Guide
Chapter 2 Printer Driver Setup
6. Click the [Have Disk] button.
The [Install From Disk] window will appear.
7. Click the [Browse] button.
The [Open] window will appear.
8. Set the “User Software CD” on the CD-ROM drive.
9. Select the [oemsetup.inf] file in the “Prn_Scan\Printer\Win9x_Me” folder of
the “User Software CD” and click the [OK] button.
The [Install From Disk] window will appear.
10. Click the [OK] button.
The next [Add Printer Wizard] window to select the printer manufacturer and model will
appear.
11. Be sure that in the list of [Printers], [Océ 3275/750 PCL] is highlighted, then
click the [Next] button.
The next [Add Printer Wizard] window to assign a port will appear.
12. Select the port to which the printing system is connected and click the [Next]
button.
Select LPT port when the printing system is used as a local printer.
The next [Add Printer Wizard] window to specify the printer name will appear.
13. Specify the printer name and click the [Next] button.
Default: [Océ 3275/750 PCL]
The next [Add Printer Wizard] window to perform the test page will appear.
14. Select whether you will perform the print test or not.
Select [Yes (recommended)] to perform the test page, or select [No] not to perform it.
15. Click the [Finish] button.
Necessary files will be copied from the “User Software CD” to complete the installation.
The printer driver of the printing system becomes available without restarting your
computer.
To Next Page
Loading...