3-28 Print Controller User’s Guide
Chapter 3 Printer Driver Functions
[Sheet Insertion] can not be performed in the following cases:
• When [Collate] is not selected in [Copies]
• When [2-in-1] or [2-in-1 Repeat] is selected in [Features] - [Combination]
• When [Booklet] is selected in [Features] - [Combination]
• When [OHP (Transparency)], [OHP-Interleave (Blank)], [OHP-Interleave (Print)] is
selected in [Media Type]
Sheet Insertion - Pages
When [Sheet Insertion] is checked, you can enter the number of page in the [Pages]
box.
When [Sheet Insertion] is not selected, [Pages] can not be performed.
[Sheet Insertion] inserts a inter-sheet at the specifyed page.
You can specify the numbers using comma “,” as follows:
e.g. insert at page 3: 3
insert at pages 3, 5, and 12: 3, 5, 12
The maximum number of total pages you can specify to insert is 28.
You can not specify the duplicate numbers in the [Pages] box.
Sheet Insertion - Tray
Specify the paper tray for the inter-sheet.
The settings you can select are as follows:
[Bypass tray], [Tray 1], [Tray 2], [Tray 3], or [Tray 4]
When [Sheet Insertion] is not selected, [Tray] can not be performed.
Sheet Insertion - Advanced
Check the [Advanced] to use the different tray for each the inter-sheet.
When [Advanced] is selected, [Settings] can be performed.
Sheet Insertion - Settings
Open the [Sheet Insertion Advanced Settings] dialog for advanced setting.
Enter the number of pages per tray.
When [Advanced] is not selected, [Settings] can not be performed.
To Next Page
Loading...