System maintenance 125
How to add the staples
1
Push against the upper part of the stapler cartridge.
2 In the same movement, lift the lower part of the stapler cartridge and pull the
stapler cartridge toward you.
3 Remove the stapler cartridge from the stapler.
4 Remove the loose staples if necessary.
Note: Make sure not to drop any staples in the finisher.
5 Take a new cartridge, type S3.
6 Remove the packing material.
7 Slide the stapler cartridge into the stapler.
8 Press until the stapler cartridge clicks into place.
Note: If the new stapler cartridge does not fit, put back the old stapler cartridge
and call service.
9 Close the top cover of the finisher.
10 Close the front door of the finisher.
To Next Page
Loading...
