Oce VarioPrint 2090 - Page 78

74 Océ VarioPrint 2090 Configuration and maintenance manual
Illustration
[34] Change the defaul t gatewa y address
[34] Change the default gateway address
How to change the default gateway address
1
Select 'System' in the title bar of the Océ VarioPrint 2090 Settings Editor.
2 Click 'Network protocols'.
3 Click 'TCP/IP protocol'.
4 Select 'Default gateway'.
5 Enter the IP address of the default gateway.
6 Click the 'OK' button to apply the changes.