Oce VarioPrint 2090 - Page 77

Printer configuration 73
Illustration
[33] Change the Subnet m ask
[33] Change the Subnet mask
How to change the Subnet mask
1
Select 'System' in the title bar of the Océ VarioPrint 2090 Settings Editor.
2 Click 'Network protocols'.
3 Click 'TCP/IP protocol'.
4 Select 'Subnet mask'.
5 Enter the Subnet mask to match the IP address.
6 Click the 'OK' button to apply the changes.
Note: (see ‘Test the network connection’ on page 83) to test the IP settings.