Oce VarioPrint 2090 - Page 76

72 Océ VarioPrint 2090 Configuration and maintenance manual
Illustration
[32] Change the IP address
[32] Change the IP address
How to change the IP address
1
Select 'System' in the title bar of the Océ VarioPrint 2090 Settings Editor.
2 Click 'Network protocols'.
3 Click 'TCP/IP protocol'.
4 Select 'IP address'.
5 Enter the 'IP address' to change the physical address of the Océ VarioPrint 2090
on the network.
6 Click the 'OK' button to apply the changes.
Note: (see ‘Test the network connection’ on page 83) to test the IP settings.