Oce VarioPrint 2090 - SNMP Settings Configuration

Printer configuration 71
Illustration
[31] Change the host name
[31] Change the host name
How to change the host name
1
Select 'System' in the title bar of the Océ VarioPrint 2090 Settings Editor.
2 Click 'Network protocols'.
3 Click 'TCP/IP protocol'.
4 Select 'Host name'.
5 Enter the name to describe the Océ VarioPrint 2090 on the network.
6 Click the 'OK' button to apply the changes.
Note: (see ‘Test the network connection’ on page 83) to test the IP settings.