Oce VL3200x - Configuring Network Settings with BRAdmin Light

Configuring your machine for a network
14
2
Setting the IP address and subnet mask 2
Using the BRAdmin Light utility to configure your machine as a network printer2
BRAdmin Light 2
The BRAdmin Light utility is designed for initial setup of the Océ network connected devices. It also can
search for Océ products in a TCP/IP environment, view the status and configure basic network settings, such
as IP address. The BRAdmin Light utility is available for Windows
®
2000/XP, Windows Vista
®
, Windows
Server
®
2003/2008 and Mac OS X 10.3.9 or greater.
How to configure your machine using the BRAdmin Light utility 2
Note
• Please use the BRAdmin Light utility that was supplied on the CD-ROM of your Océ machine.
• If you are using a firewall function of anti-spyware or antivirus applications, temporarily disable them. Once
you are sure that you can print, configure the software settings following the instructions.
• Node name: Node name appears in the current BRAdmin Light window. The default node name of the
print server in the machine is “BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless
network. (“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.)
• The default password for Océ print servers is “access”.
a Start the BRAdmin Light utility.
 For Windows
®
2000/XP, Windows Vista
®
and Windows Server
®
2003/2008 users
Click Start / All Programs
1
/ Oce / BRAdmin Light / BRAdmin Light.
1
Programs for Windows
®
2000 users
 For Mac OS X 10.3.9 or greater users
Double-click Mac OS X or Macintosh HD (Startup Disk) / Library / Printers / Oce / Utilities /
BRAdmin Light.jar file.
b BRAdmin Light will search for new devices automatically.