15
BACKLIGHT
To activate the Backlight - press the Select (Side) button.
• On the surface, the Smart Glo® feature senses the intensity of
natural light present. If a low level of light is present, the
Backlight will activate and illuminate the display for 5 sec-
onds, or the Duration time (a user setting).
• During a dive, the Oceanglo® feature will activate the
Backlight and the display will be illuminated for 5 seconds, or
the Duration time set (a user setting).
• The Backlight does not operate during a Low Battery
condition.
• Press the button again to activate as desired.
POWER SUPPLY
The Versa Pro utilizes one (1) type CR 2450 Lithium 3 volt cell
that should provide 300 hours of continuous, or 50 activation
periods, of operation. If you conduct 1 dive each time the unit
is activated, you should obtain approximately 50 dives. If you
conduct 3 dives each time the unit is activated, you should
obtain approximately 150 dives.
Battery Indicator
A Battery Indicator provides an indication of battery condition.
When power is sufficient for normal unit operation, the Indica-
tor will be displayed during Surface Mode (Fig. 8a). The
Indicator will not be displayed during Dive Mode(s).
Fig. 8 - Battery Indicator
a
To Next Page
Loading...
