25
TO SET - ELAPSED DIVE TIME ALARM
(while in the Surface Mode)
Factory set for 0:00 hr:min, the Alarm can be set to values
between 0:10 and 3:00 hr:min in increments of 0:05 hr:min.
• Press Both buttons simultaneously, release when SET: 1
appears.
• Press and release the Advance (Front) button, FO2 ap-
pears with the value flashing.
• Press the Advance (Front) button 2 more times.
• The graphic EdT, and Alarm and Dive Time icons appear
with the Elapsed Dive Time value flashing (Fig. 22).
• Press and release the Select (Side) button until the desired
Alarm value appears, or press and hold the button to scroll
through the Set Points.
• Press the Advance (Front) button to accept the setting and
advance to PC Interface, or press and hold Both buttons for
2 seconds to revert to Surface Mode.
Fig. 22 - Set Elapsed Dive
Time Alarm
To Next Page
Loading...
