29
TO SET - TIME (while in the Surface Mode)
Set for factory local time, the Time can be set to values be-
tween 0:00 and 12:59 (Am/Pm) or 0:00 and 23:59.
• Press Both buttons simultaneously, release when SET: 2
appears.
• Press and release the Advance (Front) button, the Units
screen appears with the set point flashing.
• Press the Advance (Front) button 2 more times. Time
appears with the Hour value flashing (Fig. 26).
• Press and release the Select (Side) button to advance the
Hour value in increments of one hour, or press and hold
the button to scroll through the Set Points.
• Press the Advance (Front) button to accept the setting. The
Minute value flashes (Fig. 27).
• Press and release the Select (Side) button to advance the
Minute value in increments of one minute, or press and
hold the button to scroll through the Set Points.
• Press the Advance (Front) button to accept the setting and
advance to Set Year.
Fig. 26 - Set Hour
Fig. 27 - Set Minute
To Next Page
Loading...
