22
SET MODES
To help simplify the operations you might perform at the dive
site, settings are divided into 2 categories. Set Mode #1
includes several settings that you would change more often and
Set Mode #2 includes those items not likely to change once
you set them. Set Mode 2 can be accessed by first entering
settings in Set Mode 1, or by bypassing Set Mode 1.
After gaining access to Set Mode 1 or Set Mode 2, settings
can be made in sequence one after the other, or you can
access a specific item that you want to set, bypassing others.
Set Mode Access/Timing
While in Surface Mode, press Both buttons simultaneously and
hold -
• after 2 seconds, SET: 1 appears (Fig. 17)
• after 2 more seconds, SET: 2 appears (Fig. 18)
• Access is gained by releasing the buttons during the 2
second window in which SET: 1 or SET: 2 appears. then
pressing the Advance (Front) button.
• If the buttons are held longer, and SET 1 and 2 are both
bypassed, the unit will go to Simulator (Sim) Mode which is
described on page 69.
• While in the Set Mode, if neither button is pressed during a
2 minute period, the unit will revert to Surface Mode.
Fig. 17 - Set Mode 1
Fig. 18 - Set Mode 2
To Next Page
Loading...
