69
WET CONTACTS
If the graphic H2O appears during the Fly Mode (Fig. 76) and
Desaturation Mode (Fig. 77) countdowns that alternate 2hours
after a dive, it is an indication that the water activation con-
tacts are bridged (still wet) and the unit must be rinsed in fresh
water and thoroughly dried.
• Once the unit is dry, the graphic H2O will disappear from
the display.
• If the unit is not cleaned and dried prior to the countdowns
reaching 0:00 (hr:min), or making another dive, it will shut
off then automatically reactivate.
• The graphic H2O would then appear in place of Dive
Number when Surface Mode is displayed during the
Surface Mode.
• If no dive is made, the unit would shut off after 2 hours,
then automatically reactivate again, repeating the action
until cleaned and dried.
Fig. 77 - Desaturation Mode
(activation contacts wet)
Fig. 76 - Fly Mode
(Activation Contacts Wet)
To Next Page
Loading...
