84
NOTE: If available, an adjustable face spanner tool
or pair of pointed pliers can be used by placing the
tips in the small holes of the Ring (Fig. 97).
Inspection
• Activate the unit and watch carefully as it performs a full
diagnostic and battery check, and enters Surface Mode.
Observe the LCD display to ensure it is consistently clear
and sharp in contrast throughout the screen.
WARNING: If there are any portions of the display
missing or appearing dim, or if a Low Battery
condition is indicated, return your Versa Pro to an
Authorized Oceanic Dealer for a complete evalua-
tion before attempting to use it.
Fig. 97 - Ring Installation
(alternate)
To Next Page
Loading...
