EN-146 EXPLORER BALANCES
TABLE 9-5. SPECIFICATIONS (Cont.)
EX10201
EX10201M
EX10201N
Repeatability (sd.), ≤5% of full load (g)
Repeatability (sd.), 5% of full load to full range (g)
Linearity deviation, typical (g)
Verification interval, e
(EX…M.. / EX…N..model only)
Approval Class
(EX…M.. / EX…N..model only)
3000g, 4000g,
5000g, 6000g
2500g, 5000g,
7500g, 10,000g
g, kg, ct, oz, ozt, dwt, Grain, lb, mom, msg, tical, tola, baht, Hong Kong Tael, Singapore Tael,
Taiwan Tael, N, Custom Unit 1, Custom Unit 2, Custom Unit 3
Weighing units
(EX…M.. model)
Weighing, Parts Counting, Percent Weighing, Check Weighing, Dynamic Weighing, Filling,
Totalization, Formulation, Differential Weighing, Peak Hold, Density Determination, Pipette
Adjustment, Ingredient Costing, Statistical Quality Control，Fill Weight Variation
Stabilization time (typical)
Sensitivity Temperature Drift (PPM/
°
C)
Min-Weight (typical) (g)
(USP, K=2, U=0.10%)
Min-Weight (optimal) (g)
(USP, K=2, U=0.10%, SRP≤0.41d)
Full-Color VGA Graphic LCD
5.7 in / 14.5 cm (diagonal)
4-wire resistive touch screen
AC Adapter Input: 100-240 VAC 0.6A 50-60 Hz
AC Adapter Output: 12 VDC 1.5A
190 x 200 mm
7.5 x 8.0 in
Terminal Housing dimensions
(W x D x H)
195 x 155 x 68 mm
7.7 x 6.1 x 2.7 inch
Base Housing dimensions
(W x D x H)
230 x 260 x 98 mm
9.1 x 10.2 x 3.9 inch
Assembled dimensions
(W x D x H)
230 x 393 x 98 mm
9.1 x 15.5 x 3.9 inch
550 x 385 x 291 mm
21.7 x 15.2 x 11.5 inch
Note 1: M = EC Type approved
N = NTEP certified and Measurement Canada approved
Note 2: Default Calibration weights shown in Bold
Note 3: * Availability is dependent on region.
To Next Page
Loading...
