OHAUS TP4KD - Parts Counting Error Level

33
Parts Counting Error LevelParts Counting Error Level
Parts Counting Error LevelParts Counting Error Level
Parts Counting Error Level
The parts counting error level is the level
of accuracy you consider acceptable for
parts counting results. The adjacent table
lists error levels that you can choose from.
EXAMPLE: With 5 Pct selected, 100 parts
on the pan may yield a displayed count
from 95 to 105 parts.
To view, change or disable the PC Error
Level:
1. Access the Pc Err submenu to dis-
play the current setting.
2. Press
to change the setting.
Press
to accept the displayed
setting.
When
is released, PC ERR will be
displayed again and the Setup menu will
be returned.
MODEMODE
MODEMODE
MODE
ONON
ONON
ON
TARETARE
TARETARE
TARE
ONON
ONON
ON
TARETARE
TARETARE
TARE
ERROR LEVELSERROR LEVELS
ERROR LEVELSERROR LEVELS
ERROR LEVELS
OFFOFF
OFFOFF
OFF
Disables error level limits.Disables error level limits.
Disables error level limits.Disables error level limits.
Disables error level limits.
.1 % ±0.1% acceptable error.
.25 % ±0.25% acceptable error.
.5 % ±0.5% acceptable error.
1 % ±1.0% acceptable error.
2.5 % ±2.5% acceptable error.
5 % ±5.0% acceptable error.