Oki C5100 - Using the Printer Driver Settings; Printer Driver for Windows 98;Me;XP;NT 4.0; Printer Driver Illustration Notes; Accessing Printer Properties from Applications

42049001TH Rev.1 28 /
Oki Data CONFIDENTIAL
2.2.12 Low Voltage Power Unit / FAN (ID) / FAN (PowL) / Hopping Motor / Fuser Motor
(1) Remove the print controller PWB (see section 2.2.8).
(2) Remove the controller PWB (see section 2.2.7).
(3) Remove the film 1 and the frame duct 2 to demount the FAN (ID) 3.
(4) Remove the two screws 4 and the four connectors to demount the POW unit 5.
(5) Demount the FAN (PowL) 6 by releasing claw engagement.
(6) Remove the two screws 7 and the connector to detach the hopping motor 8.
(7) Remove the two screws 9 and the connector to detach the fuser motor 0.
Note! When reassembling the FAN (PowL) 6, check the attachment direction.
Figure 2-2-12 Low voltage Power Unit / FAN (ID) / FAN (PowL) / Hopping Motor / Fuser Motor
6
8
7
9
5
1
3
0
2
4
Air
www.eManualpro.com