42049001TH Rev.1 23 /
Oki Data CONFIDENTIAL
2.2.8 Print Engine Controller PWB
C5300
(1) Open the top cover.
(2) Remove the right side cover (see section 2.2.3).
(3) Remove the connector 1, and disengage the two hooks 2 of to detach the FAN (CU) 3.
(4) Remove the three screws 4 to detach the plate shield assy (PCL) 5.
(5) Remove the three screws 6 and all the connectors to detach the print engine controller PWB
7.
Figure 2-2-8-1 Print Engine Controller PWB (C5300)