English
Appendix A - Optional Devices 97
Appendix A - Optional Devices
USB interface kit
The OKI USB Interface Kit enables you to use your
OKI DP-5000 Series printer with an Apple® iMac™ or
with a Windows 95/98® computer that has a USB port.
Important Note 1:
DO NOT unplug the USB interface cable while print-
ing. If you do so you must restart your computer
before re-commencing printing.
Important Note 2:
The OKI USB interface cable works only with the des-
ignated OKI DP-5000 printer.
Important Note 3:
If your iMac computer is running Mac OS 8.1 you must
install the iMac update 1.0 software. This upgrade is
not included on the OKI CD-ROM but can be down-
loaded, free of charge, from the Apple Web site. Please
note that you do not need to install this update with
Mac OS 8.5 or greater.
System requirements
• Apple iMac computer, Mac OS 8.1 with iMac
Update 1.0 or later.
• PC compatible computer with USB port, Win-
dows 98.
Installation for iMac
To install the OKI USB Interface Kit to enable you to
operate your DP-5000 printer with an Apple iMac, fol-
low these steps:
Caution:
Make sure the computer and printer are turned off before
you connect the USB printer cable.
1. Connect the USB interface cable (1) to the paral-
lel connector (2) on the printer.
To Next Page
Loading...
Need help?
General
