60 User’s Guide
Caution:
Brush very gently around electrical components, and be
careful not to leave any brush hairs on or near these
components.
Cleaning the print head
Follow the steps below, using isopropyl alcohol and a
cotton swab.
Caution 1:
Do not use benzene, thinner, or other volatile materials, as
they may damage the printer components.
Caution 2:
Do not get the inside of the printer wet.
1. Push the front cover release button and gently
lower the front cover.
2. Wipe the print head (1) with a cotton swab dipped
in isopropyl alcohol. The print head may not
come clean in one wipe so repeat several times.
Caution:
Avoid getting alcohol on the platen (2). Wait until the
alcohol dries before printing.
Cleaning the platen
Use cellophane tape to clean the platen as described be-
low.
1
2
To Next Page
Loading...
Need help?
General
