English
Chapter 2 - Initial Setup 11
Chapter 2 - Initial Setup
Connecting cables for Windows
When your printer has been positioned in a suitable lo-
cation, you can connect it to your Windows PC with a
printer cable and to a suitable AC power source with the
power cable.
Connecting the printer to your computer
Caution
Power to the printer and computer must be turned off and
the power cables unplugged before connecting or
disconnecting the printer cable. Otherwise damage or
malfunction may result.
Connect the printer to the computer with a bi-direction-
al printer cable. Secure the printer cable (1) to the con-
nectors on the printer (2) and on the computer (3).
Note
When using your printer with a Macintosh computer,
connect the printer to the Macintosh using a SCSI
interface module, see ‘Connecting SCSI interface for
Macintosh’ in Appendix A.
Connecting the printer to a power supply
1. Plug the power cable into the power socket on the
printer. Make sure that the power cable is
securely seated in the socket.
To Next Page
Loading...
Need help?
General
