English
Appendix A - Optional Devices 109
Checking the SCSI device number
Make sure the device number for the printer is set cor-
rectly, the printer device number is set to 6 at the facto-
ry. Each SCSI device connected to the computer must
have a unique SCSI device number. If two devices have
the same device number, they will not work properly.
To change the device number, move the DIP switches
(4) next to the connector. For information on DIP
switch settings, refer to ‘Specifications and Settings’ in
Chapter 8.
Power supply connection
Connect your printer to a power supply as described in
Chapter 2, Initial Setup.
To Next Page
Loading...
