Oki ES6450 - Page 107

Changing settings from the operator panel
- 107 -
Item
Factory
default
settings
Description
X Dimension (Fn31) 210
millimeter or
8.5 inch
*2
Sets the paper width when you have
selected a custom size for the paper that you
want to print on from Tray 3.
Y Dimension (Fn32) 297
millimeter or
11.0 inch
*2
Sets the paper length when you have
selected a custom size for the paper that you
want to print on from Tray 3.
Media Type (Fn33) Plain Sets the type of the paper you want to print
on from Tray 3.
Media Weight (Fn34) Light Sets the weight of the paper you want to
print on from Tray 3.
Other Size A5 [LEF] Specifies the paper size when the paper size
dial of Tray 3 is set to [OTHER].
Tray4 Config Paper Size (Fn40) Cassette
Size
Sets the size of the paper you want to print
on from Tray 4.
For [Cassette Size], follows the settings of
the paper size dial of the paper tray.
X Dimension (Fn41) 210
millimeter or
8.5 inch
*2
Sets the paper width when you have
selected a custom size for the paper that you
want to print on from Tray 4.
Y Dimension (Fn42) 297
millimeter or
11.0 inch
*2
Sets the paper length when you have
selected a custom size for the paper that you
want to print on from Tray 4.
Media Type (Fn43) Plain Sets the type of the paper you want to print
on from Tray 4.
Media Weight (Fn44) Light Sets the weight of the paper you want to
print on from Tray 4.
Other Size A5 [LEF] Specifies the paper size when the paper size
dial of Tray 4 is set to [OTHER].
Paper Feed (Fn80) Tray1 Specifies the paper feeding tray.
The settings of the printer driver take priority.
Auto Tray Switch On Sets whether or not to use the auto tray
switch function.
The settings of the printer driver take priority.
Tray Sequence Down Specifies the selection order of the tray
when the auto tray selection or auto tray
switching function is used.
Duplex Last Page Skip Blank
Page
Sets whether or not to print the last 1-sided
page when the duplex printing is done on
odd-numbered pages.
System
Adjust
Power Save Time (Fn200) 1minute Sets the time that will elapse before the
power save mode is entered.
Value range: 1 minute, 2 minutes, 3 minutes,
4 minutes, 5 minutes, 10 minutes, 15
minutes, 30 minutes, 60 minutes
Sleep Time (Fn200) 15minutes Sets the time that will elapse before the
sleep mode is switched from the power save
mode.
Value range: 1 minute, 2 minutes, 3 minutes,
4 minutes, 5 minutes, 10 minutes, 15
minutes, 30 minutes, 60 minutes