Oki ES6450 - Page 117

Changing settings from the operator panel
- 117 -
Item
Factory
default
settings
Description
Media Type (Fn33) Plain Sets the type of the paper you want to print
on from Tray 3.
Media Weight (Fn34) Light Sets the weight of the paper you want to
print on from Tray 3.
Other Size A5 [LEF] Specifies the paper size when the paper size
dial of Tray 3 is set to [OTHER].
Tray4 Config Paper Size (Fn40) Cassette
Size
Sets the size of the paper you want to print
on from Tray 4.
For [Cassette Size], follows the settings of
the paper size dial of the paper tray.
X Dimension (Fn41) 210
millimeter or
8.5 inch
*2
Sets the paper width when you have
selected a custom size for the paper that you
want to print on from Tray 4.
Y Dimension (Fn42) 297
millimeter or
11.0 inch
*2
Sets the paper length when you have
selected a custom size for the paper that you
want to print on from Tray 4.
Media Type (Fn43) Plain Sets the type of the paper you want to print
on from Tray 4.
Media Weight (Fn44) Light Sets the weight of the paper you want to
print on from Tray 4.
Other Size A5 [LEF] Specifies the paper size when the paper size
dial of Tray 4 is set to [OTHER].
Paper Feed (Fn80) Tray1 Specifies the paper feeding tray.
The settings of the printer driver take priority.
Auto Tray Switch On Sets whether or not to use the auto tray
switch function.
The settings of the printer driver take priority.
Tray Sequence Down Specifies the selection order of the tray
when the auto tray selection or auto tray
switching function is used.
Duplex Last Page Skip Blank
Page
Sets whether or not to print the last 1-sided
page when the duplex printing is done on
odd-numbered pages.
Wireless(Infr
astructure)
Setting
Wireless(Infrastructure) Disable Switches the state (enabled or disabled) of
the wireless(Infrastructure).
Network
Setting
IP Address Set Auto Set to obtain the IPv4 address automatically
or set it manually.
IPv4 Address 192.168.101.
100
Input the IPv4 address manually.
Displayed when [IP Address Set] is set to
[Manual].
Subnet Mask 255.255.255.
0
Input the subnet mask.
Displayed when [IP Address Set] is set to
[Manual].
Gateway Address 0.0.0.0 Input the gateway address.
Displayed when [IP Address Set] is set to
[Manual].
DHCPv6 Disable Set to obtain the IPv6 address automatically.
Set to Disable when you do not use the IPv6
address.
Automatic
setup (WPS)
WPS-PBC Executed when setting is done by pressing
the WPS button of the wireless LAN access
point.