Oki ES6450 - Page 118

To Next Page

To Previous Page

Changing settings from the operator panel

- 118 -

Item

Factory

default

settings

Description

WPS-PIN Executed when the PIN code displayed on

this machine is registered with the wireless

LAN access point.

Wireless

Network

Selection

xxxxxx

......

Displays a list of wireless LAN access point

names found by the search.

Manual

Setup

SSID

Input the SSID.

Security Disable Sets the security of the wireless LAN

function.

WEP Key

Input the WEP key.

WPA

Encryption

Type

Displays the WPA-

PSK encryption type. The

setting is carried out automatically according

to the security settings. (Impossible to switch

in this menu)

WPA

Pre-shared

Key

Input the pre-shared key. Displayed when

[Security] is set to any other value than

[Disable] or [WEP].

Execute

Executes the changes to security settings.

Wireless Reconnection Reconnects to the wireless LAN

(infrastructure).

*1 Factory default setting values are different according to the country or region.

*2 The values are displayed with the unit set in [Admin Setup] - [Tray Setup] - [Unit of Measurement].

Admin Setup

Item

Factory

default

settings

Description

Enter Password ********** Input the password required to enter the

Admin Setup menu.

Network

Setup

General

Setup

Extended Network Disable

Selected when you want to enable any other

network than the standard wired LAN.

Enabling Default Gateway Wired(LAN1) Specify the network connection method for

segment-based communication.

TCP/IP

Enable

Enables/Disables the wired LAN.

NetBIOS over TCP Enable Enables/Disables the NetBIOS over TCP

protocol.

Web Enable Enables the access from the web browser.