Oki ES6450 - Page 128

Changing settings from the operator panel
- 128 -
Item
Factory
default
settings
Description
WEP Key
Input the WEP key.
WPA
Encryption
Type
Displays the WPA-PSK encryption type.
The setting is carried out automatically according to the
security settings. (Impossible to switch in this menu)
WPA
Pre-shared
Key
Input the pre-shared key.
Displayed when [Security] is set to any other value than
[Disable] or [WEP].
Execute
Executes the changes to security settings.
Wireless reconnection
Reconnects to the wireless LAN (infrastructure).
Wireless(AP Mode) Setting
Item
Factory
default
settings
Description
Enter Password ********** Input the password required to enter the Admin Setup
menu.
Wireless(AP mode)
Disable
Enables/Disables wired (AP mode).
Automatic Setup (PushButton)
If YES is selected, automatic connection can be started with
a push button.
If the connection has failed, the system goes back to the
home screen. If the connection is successful, [Wireless(AP
Mode) connection setting is completed/Close by the setting
button] is displayed.
Manual Setup Displays the SSID and password of this machine for manual
setup.
Connection Setting SSID OKI-Printer
name-Last 6
digits of the
MAC address
Inputs a new one to change the SSID.
Password
Inputs a new one to change the password.
IPv4 Address 192.168.110.
100
Input the IPv4 address.
Execute
Executes connection setup.
AP Mode User Setting Don't
disclose user
Sets whether or not to disclose the AP mode information to
users other than the administrator.