Oki ES6450 - Page 127

Changing settings from the operator panel
- 127 -
Item
Factory
default
settings
Description
Color Density Cyan Density
(Fn310)
0 Sets the print density for each color. Adjusts within the
range of ±3. Darkens the print result by adjusting in +
direction, or lightens the print result by adjusting in -
direction.
Magenta Density
(Fn311)
0
Yellow Density
(Fn312)
0
Black Density
(Fn313)
0
Print Color Tuning Pattern (Fn302)
Execute
Prints a pattern for density adjustment.
Cyan Tuning
Highlight
0
Adjusts the density of highlights (light areas), mid-tone and
dark tone (dark areas) for each color. Darkens the density
by adjusting in the plus direction, and lightens the density by
adjusting in the minus direction.
Used for fine adjustment that is not possible with the densi
ty
setting. Adjusts within the range of ±3.
Mid-Tone
0
Dark
0
Magenta Tuning
Highlight
0
Mid-Tone
0
Dark
0
Yellow Tuning
Highlight
0
Mid-Tone
0
Dark
0
Black Tuning
Highlight
0
Mid-Tone
0
Dark
0
AirPrint
Item Factory default settings Description
AirPrint
Enable
Sets AirPrint to [Enable].
Wireless(Infrastructure) Setting
Item
Factory
default
settings
Description
Enter Password ********** Input the password required to enter the Admin Setup
menu.
Wireless(Infrastructure)
Disable
Enables/Disables the wireless LAN (infrastructure).
Network
Setting
IP Address Set Auto Set to obtain the IPv4 address automatically or input it
manually.
IPv4 Address 192.168.101.
100
Input the IPv4 address manually.
Displayed when [IP Address Set] is set to [Manual].
Subnet Mask 255.255.255.
0
Input the subnet mask.
Displayed when [IP Address Set] is set to [Manual].
Gateway Address 0.0.0.0 Input the gateway address.
Displayed when [IP Address Set] is set to [Manual].
DHCPv6 Disable Set to obtain the IPv6 address automatically. Set to disable
when you do not use the IPv6 address.
Automatic
setup (WPS)
WPS-PBC Executed when setting is done by pressing the WPS button
of the wireless LAN access point.
WPS-PIN Executed when the PIN code displayed on this machine is
registered with the wireless LAN access point.
Wireless
Network
Selection
xxxxxx
......
Displays the list of wireless LAN access points detected by
this machine.
Manual
Setup
SSID
Input the SSID.
Security
Disable
Sets the security of the wireless LAN function.