Printing
- 192 -
6
Specify other settings as necessary, and click [Print].
Only the print data with a password set for encryption is sent to this machine, but without printing.
If there is no detail settings displayed in the [Print] screen, click [Show details] at the bottom of the screen.
Printing a document with encryption/password set from this machine
You can print the encrypted print data with a password saved in the machine's memory.
1
Check that "Ready To Print" appears on the display.
If the machine is in the power save mode, press «POWER SAVE» to restore.
2
Press «Fn» on the operator panel.
3
On the functional number screen, press «2» and «OK».
4
When the User List appears, select the user name of your PC and press «OK».
5
Input the password set on the PC, and press «OK».
6
When a list of private jobs appears, press the scroll button ▲ or ▼ to select the print data to print
and press «OK».
7
Check that [Execute] is selected, and press «OK».
Select [Delete] and press «OK» to delete the specified print data.
The print data saved in the memory is automatically deleted when the print data has been printed or has not
been printed after a certain period of time. If an error occurs sending data or it is detected that the print data has
changed since it was sent from the PC, the print data will be deleted automatically.
To Next Page
Loading...
