Troubleshooting
- 330 -
Wireless Startup Failed
Press OK To Hide This Message.
Please See HELP For Details
517 Restart this machine.
If the problem still persists even after the reboot, power off this
machine and check if the wireless LAN module is installed. For
the position of the Wireless LAN module, refer to "Installing the
wireless LAN module(P.22)".
If the wireless LAN module is not installed, press the scroll
button on the operator panel several times to select [Disable] in
[Admin Setup] - [Network Setup] - [General Setup] - [Extended
Network].
If the wireless LAN module is installed, check if the model name
of the wireless LAN module is compatible with this machine.
If the model name is incorrect, replace the wireless LAN module
with the one suitable for this machine.
If the model name is correct, consult your dealer.
Receiving Data Timeout
Press OK To Hide This Message.
Please See HELP For Details
519 The data could not be received within the correct time.
When the print result is not as good as expected, extend the
time for network timeout. The factory default setting is 90
seconds.
Press the scroll buttons on the operator panel several times to
change the settings in [Menus] - [System Setup] - [Timeout
Image Drum Sensor Error. Check
And Reset Color Name Image
Drum and Belt Unit
Please See HELP For Details
540, 541, 542, 543 A sensor error has occurred to the image drum of the indicated
color.
Please reinstall the image drum. To install the image drum, see
"Replacing the image drum(P.303)".
Please reinstall the belt unit. To install the belt unit, see
"Replacing the belt unit(P.308)".
If the error persists, contact your dealer.
540: Yellow; 541: Magenta; 542: Cyan; 543: Black
Color Name Toner Cartridge Is
Not Installed Correctly
Reset It Correctly. Please See
HELP For Details
544, 545, 546, 547 The toner cartridge of the displayed color is not installed
properly. Reinstall the toner cartridge. To install the toner
cartridge, see "Replacing the black(K) toner cartridge and the
waste toner box(P.298)" or "Replacing the toner cartridge
(C/M/Y)(P.301)".
544: Yellow; 545: Magenta; 546: Cyan; 547: Black
Color Name Toner Cartridge Is
Not Installed Correctly
Reset It Correctly. Please See
HELP For Details
The above message has been
displayed multiple times.
544 Change the settings to the following: Moisture Control: Mode 2;
Quiet Mode: On.
To print with low toner consumption, please restore the settings.
(The factory default settings are as follows: Moisture Control:
Off; Quiet Mode: Off)
Color Name Image Drum End Of
Life. Replace With A New Color
Name Image Drum
Please See HELP For Details
560, 561, 562, 563 The image drum of the displayed color has reached the end of
its service life.
Please replace the image drum with a new one.
To replace the image drum, see "Replacing the image
drum(P.303)".
560: Yellow; 561: Magenta; 562: Cyan; 563: Black
Color Name Image Drum End Of
Life. Replace With A New Color
Name Image Drum
Press OK to ignore service life and
continue printing. Please See
HELP For Details
564, 565, 566, 567 The image drum of the displayed color has reached the end of
its service life.
Please replace the image drum with a new one. You can
continue printing for a while by pressing «OK» on the operator
panel, but the print quality is not guaranteed.
To replace the image drum, see "Replacing the image
drum(P.303)".
564: Yellow; 565: Magenta; 566: Cyan; 567: Black
To Next Page
Loading...
