Oki LD670 - Page 155

154
■ How the printer accepts your selection of an item
1) When you press and hold down the FEED switch for one second or longer, the
printer accepts the top printed item as your option.
2) Then, the printer starts processing for the selected item.
■
END
1) When "END" is printed, press and hold down the FEED switch for one second
or longer to end sensor adjustment.
2) The printer returns to normal operation mode.
■
ADJUSTMENT
1) When "ADJUSTMENT PRINT" is printed, press and hold down the FEED
switch
for one second or longer to start printing of settings.
2) The printer prints all the current settings.
3) After printing the settings, the printer returns to its state at the start of
sensor adjustment.