Oki LD670 - Other Settings; Initializing the Printer Setup Information

70
6-10. Other Settings
This printer allows you to specify whether to feed paper up to the top-of-form
position at power-on and whether to cut paper upon the closing of the cover.
There are two methods of changing the setting:
(1) Setting up the printer
Change the setting as described in Example (4) in Section 10-2, "Setting
Up the Printer."
(2) Using the printer utility
See "Section 3.2.4 Memory Switch settings" in the
Utility User's Guide .
6-11. Initializing the Printer Setup Information
You can disable the settings you specified on the printer and restore the default
settings preset at shipping.
Initialize the settings as described in Example 5) in Section 10-2, "Setting Up
the Printer."