214
14-7. Method of setting guide plate
Loosen the knurled screw of the guide plate of each kind of the roll paper core size,
set the set position, then fix the knurled screw.
1 is default position. (The following chart is a position where the core of
one-inch diameter is set.)
1 : Position for 1.0 inch core size
1.5 : Position for 1.5 inch core size
2 : Position for 2.0 inch core size
3 : Position for 3.0 inch core size
Knurled screw of guide plate
2
1.5
1
To Next Page
Loading...
