151
10-4. Sensor Adjustment
10-4-1. Sensor adjustment mode
1. Before starting work for this adjustment, verify the following printer
conditions:
(1) The power is turned off.
(2) Paper is loaded on the printer.
(3) The cover is closed.
2. Enter special mode.
Turn on the power switch on the right side of the printer while holding down
the FEED switch on the left part of the top cover.
Note: You must hold down the FEED switch until the printer starts printing.
Note: If you have passed the item that you want to select, quickly press the FEED
switch repeatedly until you return to the first item.
To Next Page
Loading...
