69
6-9. Cutting Position Correction
This printer allows you to correct (upward or downward) the top-of-form
position, cut position, peeling-off position and tear-off position. Change the
setting as required.
You can use one of the following methods to change this setting.
(1) Using the Windows printer driver
See "Section 4.1 [Custom Paper] Tab" in the
Windows Driver User's Guide
.
(2) Using the printer utility
See "Section 4.3 Adjusting Cut Position or Tear Off Position" in the
Utility
User's Guide
.
To Next Page
Loading...
