Oki LD670 - 13 Specifications; General Specifications

195
13. Specifications
13-1. General Specifications
(1) Print method: Direct line thermal printing system
(2) Dot resolution: 8 dots/mm (0.125 mm)
(3) Paper width: 83 mm, 80 mm, or 70 to 25.4 mm (by units of 1 mm)
- The paper width is set to 70 mm at the time of shipment from the factory.
- If the roll paper partition attached to the printer is removed, you can select a
paper width of up to 83 mm.
Note: Paper with a width within a range of 71 to 79 mm cannot be used.
(4) Print speed:
single-color thermal paper Maximum print speed: 260 mm/s
Paper width
Print speed
83 to 58 mm
Up to 260 mm/s
57 to 38 mm
Up to 180 mm/s
37 to 25.4 mm
Up to 80 mm/s
- The print speed is set to 140 mm/s at the time of
shipment from the factory.
two color thermal paper Maximum print speed: 115 mm/s
Paper width
Print speed
83 to 58 mm
Up to 115 mm/s
57 to 38 mm
Up to 115 mm/s
37 to 25.4 mm
Up to 80 mm/s