Oki LD670 - Method of Setting PNE Sensor

213
14-6. Method of setting PNE sensor
Select PNE sensor position by each size of roll paper core diameter, then
pinch and fix the screw.
1 is default position. (The following chart is a position where the paper tube of
one-inch diameter is set.)
1 : Position for 1.0 inch core size
1.5 : Position for 1.5 inch core size
2 : Position for 2.0 inch core size
3 : Position for 3.0 inch core size
1 1.5 2 3
Screw PNE sensor