Oki LD670 - 14 Roll Paper Unit; Outline; Nomenclature

204
14. Roll Paper Unit
14-1. Outline
The wide roll paper unit is optional.
A maximum φ200-mm roll can be used.
Mount to the rear of the printer to use.
14-2. Nomenclature
PNE sensor cable
PNE sensor
Connects to the printer.
Partition
Adjust position
according to paper
width.
Roll paper shaft
(enclosed)
Protruding
printer
connector
Cable clamps
Used to clamp the interface and AC adapter
cable.
※
Roll paper shaft for
1.5 inches and two-inch
diameter is an option
sold separately.