39
Note : Before loading a new roll, make sure that an old core does not remain in
the roll holder. Leaving an old core will cause a paper-near-end error
condition.
Note : The roll paper must have no deformities. Using roll paper such as that
shown in the figure below may cause a paper jam, uneven printing, or other
printing problem.
Note : If the loaded roll paper is loose (slack) as shown below, take up the slack
before printing on the paper. Printing on roll paper that is loose may cause
a paper jam, uneven printing, or other printing problem, which will prevent
the printer from detecting paper near end conditions.
from the front cover
upside down
To Next Page
Loading...
