47
6-1. Paper Information Setting Using the Driver
Printer setup flow
I. Installing the driver
↓ See "Chapter 3 Installation" in the
Installation Guide
.
II. Paper layout detection
↓ Provide the printer with the paper layout information described in the
Manual Section 6-1-1, "Paper layout."
III. Custom paper creation
↓ Create your custom paper as described in the Manual Section 6-1-2,
"Custom paper."
IV. Printing from an application
Perform printing as described in the Manual Section 6-1-3,
"Printing from an application." (The use of WordPad is assumed for
the procedure described in Section 6-1-3.)
To Next Page
Loading...
