52
4 When a confirmation message appears, respond as instructed and then click
the [OK] button.
* You may encounter a paper layout error when attempting to replace paper
in one of the following patterns:
- Change from die-cut label paper to plain paper
- Change from black mark paper to plain paper
- Change from die-cut label paper to black mark paper
- Change to paper having a different paper layout
* If the error remains even after setting is completed, re-verify that the paper
loaded on the printer matches the custom paper setting.
* The [Transfer to Printer] button works even when the new paper is not
loaded. Before actually printing data, however, be sure to replace the
paper.
* If the newly set type of paper is not plain paper, the printer feeds paper up
to the top-of-form position.
5 In the LD670 Raster Properties window, click the [OK] button.
To Next Page
Loading...
