- 268 -
9. Operating Management/ Specifications
Copy Setup
Item Factory
default
setting
Description
Scan Size A4 or
Letter
Sets the default scan size.
Duplex Copy OFF(Simp
lex) or
ON(Duple
x)
Sets the default setting of whether to turn
duplex copying on or off, and the default
binding position.
Binding (Does not appear when Duplex Copy is set to
OFF)
Long
Edge Bind
Set the binding position of documents.
Zoom 100% Sets the default zoom rate.
Sort ON Sets whether to collate copied documents by
default.
Image Settings Density 0 Sets the default density.
Document Type Text &
Photo
Sets the default image quality.
Resolution Normal Sets the default resolution.
Background Removal Auto Sets the default background removal.
Show-Through Removal Middle Sets the default value of the show-through
removal function.
Contrast 0 Sets the default contrast.
Hue 0 Sets the default value of the hue.
Saturation 0 Sets the default value of the saturation.
RGB R:0, G:0,
B:0
Sets the default value of RGB contrast.
Direction Portrait Selects the default page orientation of
documents.
ID Card Copy OFF Sets whether to use the ID card copy mode by
default.
Continuous Scan OFF Sets whether to use Continuous Scan mode.
Mixed Size OFF Sets whether different sized documents are
copied on each size paper by default.
Margin Margin OFF Sets the default margins.
Front Left 0 mm (0
inch)
Available range: 0 to ±25 mm (0.0 to 1.0 inch)
(1 mm increment, 0.1 inch increment)
Top
Back Left
Top
Edge Erase Setting ON Sets whether to erase the shade created in the
surrounding of 2-page spread documents by
default.
Width 2 mm (0.1
inch)
Sets an erasing width.
Available range: 2 to ±50 mm (0.1 to 2.0 inch)
(1 mm increment, 0.1 inch increment)
Item Factory
default
setting
Description
To Next Page
Loading...
Need help?
General
