- 74 -
3. Scan
1
Press the (SETTING) button on the operator panel.
2
Press the button to select [Profile] and press the button.
3
Press the or button to select the profile No. you want to delete and
press the button.
4
Press the button to select [Delete] and press the (OK) button.
5
Check that [Yes] is selected on the confirmation screen, and press the (OK)
button.
Changing a Destination (Profile) from the Operator Panel
• Server Setting
• Transmission Option
•Scan Setting
Deleting a Destination (Profile) from the Operator Panel Tables of Profile Setting Items
Item Factory default
setting
Description
No. - Displays an item number.
Profile Name (NULL) Set a profile name. You can enter up to
16 characters.
Protocol CIFS Selects a protocol to use for storing files.
Target URL (NULL) Sets a server address and directory to store
the scanned data. You can enter up to
144 characters.
User Name (NULL) Sets a user name log in to the server. You
can enter up to 32 characters.
Password (NULL) Sets a password log in to the server. You can
enter up to 32 characters.
Item Factory default
setting
Description
Encode Communication None Selects an encryption method for
communication. Not available when using
CIFS protocol. Choices vary depending on
the protocol being selected.
Port No. 445 Sets a port number. Available range: 1 to
65535
PASV Mode OFF Sets whether to use a FTP Passive mode.
Displayed when FTP is set as a protocol.
CIFS Character Set UTF-16 Select the character code to use. Displayed
when CIFS is set as a protocol.
Item Factory default
setting
Description
Scan Size A4 or Letter Selects a scan size.
To Next Page
Loading...
Need help?
General
