- 351 -
11. Utility Software
Setting This Machine as the IPP Printer in a Windows Environment
Add this machine to your computer as an IPP printer.
If you enable IPP print, you can send print data to this machine via the Internet. This section
describes how to enable IPP print in a Windows environment.
1
Click [Start], and then select [Devices and Printers] > [Add a Printer].
2
Select [Add a network, wireless or Bluetooth printer] in the [Add Printer]
wizard.
3
Select [The printer that I want isn't] from the list of available printers.
4
Select [Select a shared printer by name].
5
Enter "http://(The IP address of this machine)/ipp" or "http://IP address of this
machine)/ipp/lp", and then click [Next].
6
Click [Have Disk].
7
Insert the "Software DVD-ROM" into the computer.
8
Enter the following value in [Copy manufacturer's files from], and then click
[Use].
•
For PCL driver: "D: Drivers _PCL"
•
For PS driver: "D: Drivers PS"
•
For XPS driver: "D: Drivers XPS"
The above value is an example of the DVD-ROM drive is set to the D drive.
9
Select the INF file, and then click [Open].
10
Click [OK].
11
Select a model, and then click [OK].
12
Click [Next].
13
Select [Finish].
14
Print the test page after installation is complete.
Setting This Machine as the IPP Printer in a Mac OS X Environment
Add this machine to a computer as an IPP printer.
If you enable IPP print, you can send print data to this machine via the Internet. This section
describes how to enable IPP print in a Mac OS X environment.
1
Insert the "Software DVD-ROM" into the computer, and then install the driver.
Installing Software
2
Select [System Preferences] from the Apple menu.
3
Click [Print & Scan].
4
Click [+].
5
Click the [IP] tab.
6
Select [IPP (Internet Printing Protocol)] from [Protocol].
7
Enter the IP address of this machine in [Address].
8
Enter "ipp/lp" in [Queue].
9
Click [Add].
10
Click [Continue].
11
Check that the machine is registered in [Print & Scan].
Using IPP
To Next Page
Loading...
Need help?
General
