Oki MC563 - Displaying the Alert Info

- 396 -
11. Utility Software
5
Enter the administrator password, and then click [OK].
The factory default password is "999999".
6
Select a cloning destination to and cloning settings.
7
Click [Execute].
8
Enter the password for the cloning source and target and click [OK].
Results are displayed.
• Basic Settings
• Device Settings
• Filter Settings
• Checking Logs
The time and time zone of this machine must be consistent with those of your computer.
Basic Settings
1
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] >
[Configuration Tool].
Displaying the Alert Info