- 293 -
9. Operating Management/ Specifications
using the authentication server succeeds, the cache authentication is not available
anymore.
7
Press [Submit].
8
Click [Role Assignment Regulations].
Sets a rule for assigning roles to LDAP authentication users. A rule for assigning roles
can be set on the [Role Assignment Registrations] screen displayed by clicking [LDAP
Authentication Settings] on the [User Management] screen and clicking [Role
assignment regulations]. Register a set of LDAP key/value and role name. The String
type attribute key can only be used.The entry box is blank by default.
9
To add a new rule for assigning a role, click [+].
10
When the role assigning screen appears, enter the required information.
The screen image in step 8 is used as an explanation. In this case, [Role A] is assigned
if the attribute key [department] is [team A]. Up to 5,000 role assignment regulations
can be registered. Up to 50 types of character strings of attribute key can be set in
LDAP key. You can enter up to 64 characters. If several regulations match one user, all
the roles are assigned. If no role is found, [.DefaultRole] is assigned.
To add role assignment regulations, press the [+] button on the [Role assignment
regulations] screen.When the [+] button is pressed, the role assignment registration
windows pops up.Enter[LDAP Key] and [LDAP Value] on the popup screen, select a
role to be assigned when the condition matches, and then press the registration button
to register the regulation.
11
Press [Submit].
Enabling Access Control
After the user information is registered and the server authentication setting is completed,
enable the access control.
1
Open the Web page of the machine.
Open the Web Page of This Machine
2
Log in as the administrator.
Log In as the Administrator
To Next Page
Loading...
Need help?
General
