- 298 -
9. Operating Management/ Specifications
4
Select the [Use User Authentication] check box.
Clear the [Use User Authentication] checkbox if you want to use the Job Accounting Client PIN as the user
authentication information.
5
Enter [User Name] and [Password].
Select the [Use logon name as user name] check box if you use the logon name to Mac
as a user name.
6
If [Authentication Type] is displayed, select user's authentication destination
and authentication type from the list.
•
Auto: Follows the logon method to Mac When the user has logged on to the domain,
[Server LDAP] is used and when the user don't logged on to the domain, [Device
Local] is used as the authentication method.
•
Device Local: Authenticates with the user information stored in the machine.
•
Server LDAP: Authenticates with the user information stored in the server using
LDAP.
•
Server Kerberos: Authenticates with the user information stored in the server using
Kerberos.
7
If [Summary Account Name] is displayed, set a type of summary account
(account) to be charged usage amount of printing (points) and name.
If you want to add up for each user and group to which the user belongs, select a group
from [Type] and specify the group name in [Name].
If you want to add up for shared account which multiple users can use, select a shared
account from [Type] and specify the shard account name in [Name].
8
Make required settings.
9
Click [Print].
• When using authentication type and Summary Account
1
Select [System Preferences] from the Apple menu.
2
Click [Print & Scan].
3
Select the device, and then click [Options & Supplies].
4
Check functions you want to use in the [Options] tab.
5
Change Default Authentication Type and then click [OK].
To Next Page
Loading...
Need help?
General
