Oki MICROLINE 8810 - Setup Menu; General Setup Options; Feed and Interface Setup

Microline 8810 User’s Guide
36
Setup
Note The default setting is in bold blue type.
Item Settings
Multi Pass Bi-directional , Uni-directional
Graphics
Bi-directional , Uni-directional
Graphics Data
(ML Only)
8 Bits,
7 Bits
Rcv. Buffer 128 , 0 K
Data Word (ML Only)
8 Bits , 7 Bits
Panel Function
Full , Limited
Path Change
Not Tear Off , Tear Off
CutSheet Smooth
Valid , Invalid
Skp Ovr Binding Invalid,
Valid 1 , Valid 2
High Skip
Yes, No
Eject Condition Bottom Detect , FF Code
Sheet Feed Mode
(Applies only if the optional
CSF is installed.)
Manual , CSF
CSF Select
(Applies only if the optional
CSF is installed.)
CSF Front,
CSF Rear
Print Suppress No , Yes
Auto LF
No , Yes
Auto CR
No , Yes
Print DEL Code
No , Yes
SI Pitch (10) 15 CPI,
17.1 CPI
SI Pitch (12) 12 CPI, 20 CPI
Reset Inhibit No , Yes