Oki MICROLINE 8810 User Manual

Microline 8810 User’s Guide
61
Paper End
Choose what happens when paper end is detected when you are
using manual feed from the platform: On-line [the default] or
Off-line.
Parallel I/F
Only Nibble Mode supports bi-directional.
Choose the printing used by the parallel interface:
Uni-directional or Bi-directional [the default].
Parity
Applies only when the optional RS-232C Serial Interface is
installed.
Settings include None [the default], Odd and Even.
Path Change
Choose whether or not the Tear Off feature is engaged when you
change to the continuous forms path. See page 75. The default
is off (Not Tear Off). To set the printer to automatically engage
the Form Tear feature when it switches to continuous forms
printing, change the setting to Tear Off.

Oki MICROLINE 8810 Specifications

General

Color	No
Built-in barcodes	EAN13, PostNet, UPC-A, UPC-E
Maximum number of copies	8 copies
Fonts included	5
Media thickness	0.48 mm
Dimensions (WxDxH)	598 x 397 x 235 mm
Power requirements	120V-240V (±10%, 50Hz/60Hz)
Connectivity technology	Wired
Compatible operating systems	Windows Vista 32/64, XP, 2000, 98, NT 4.0, 2003 Server
Print direction	Bi-directional
Maximum duty cycle	24000 pages per month
Mean time between failures (MTBF)	10000 h
Sound pressure level (printing)	55.5 dB
Power consumption (standby)	25 W
Power consumption (typical)	120 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	30 - 85 %